Motorcycle wire harness wholesalers poor peeling size: The next process (clamping) cannot be operated normally, which leads to the failure of the finished product.

2. Poor wire size: The wire size is too short, resulting in unqualified finished wire.

3, core damage, oxidation: poor crimping, virtual connection.

Defective product handling process: (example of poor size)

1. Operator: If the size is too short, immediately find the cause of the failure, communicate with the inspector to prevent the occurrence of defective products, and scrap the short size directly. The rework of the wire stripper is confirmed by the inspector.

2. Inspector: If the product is found to be defective, it is required to immediately find the cause and rectify it, and review and deal with the defective product. If there is a batch of defective products, it should be immediately shut down and rectified and reported to the immediate leadership. If you want to learn more about transmission wire harness made in China,you can contact us.